For more products, accessories, and our support
knowledge base, visit www.turtlebeach.com
Operating Instructions
Connecting Music Players
X2
Wireless Xbox
Headphones
®
®
The X2 may be used for listening to
other audio sources, such as the
output of your TV, the output of your
PC sound card, an Mp3 player, home
theater system, etc. In each case,
simply connect the output of the
audio device to the audio input jack
on the base unit and set the level
control for optimum listening volume.
As an example, the illustration below
shows how to connect the X2 base
unit to the output of a home theater
system. In this case, the base unit
audio input would be connected to
the stereo line output on the home
theater receiver. In some systems,
this would be the recording line
output, typically used for a cassette
recorder, while on other systems it
would be a pre-amplifier line output.
Refer to the instructions included with
your unit for details.
Configuring Xbox Settings
IMPORTANT: In order to hear
other players you must make sure
that the following is set from the
Xbox 360 dashboard.
1. From the Xbox 360 Dashboard,
press the Xbox Guide button
(the X button in the center of your
controller) to access your Xbox
Live Settings.
2. Navigate to the "Personal
Settings" selection, and press the
"A" button on your controller.
3. Select "Voice" from the following
menu, and press "A".
4. On the Voice screen, make sure
that "Play Through Both" is
selected for Voice Output
selection and that volume is set
to 10 (see below).
5. You may need to lower the ingame
effects and music volume and
increase the headphone volume to
balance the chat level to your
preference.
Connecting the Microphone
The X2 microphone may be used to
communicate with other players
during Xbox Live multi-player gaming
sessions. Use the included 2.5mm
cable to connect the microphone to
the Xbox controller. Insert the light
gray plug into the headphones and
the dark gray plug into the Xbox
controller, as illustrated below. The
switch integrated into the cable may
be used to mute the microphone
when you don't want other players to
hear you talking.
Connecting the Xbox
Use the included cable to connect the
base unit, Xbox and sound system as
shown. This will allow you to hear the
Xbox with either the sound system or
the X2 headphones.
Step 1:
Base Unit
Base Unit
TV or
Sound System
Xbox
Xbox Game
Amp/Receiver
Insert the mini plug into the
Audio Input jack on the base
unit and set the input level
switch to Low or High
(depending on the output
level of your system).
Step 1:
Insert the mini plug into
the Audio Input jack on
the base unit and set
the Input Level switch
to LOW.
Step 2:
Insert the male RCA plugs into the audio
input jacks on the TV or sound system.
Step 3:
Insert the RCA plugs from the
Xbox into the female RCA jacks.
Step 4:
Setup software
settings as shown
on "Configuring
Xbox Settings".
Insert the light gray plug
into the headphone jack
labeled with the Xbox
controller symbol.
Use the Mic Mute button on
the cable to disable the sound
from the microphone.
Insert the dark gray plug
into the headphone jack on
the Xbox controller.
Step 2:
Insert the red and
white male RCA
plugs into the line
output jacks on the
sound system.
TV L
TV L
TV R
TV R
XBOX R
XBOX R
XBOX L
XBOX L
TV L
TV L
TV R
TV R
XBOX R
XBOX R
XBOX L
XBOX L
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern